High Pole Lights Have A Strong Decorative
High pole lights are used for roads, roads and other places of a lighting. Handsome in appearance, with a strong decorative. Lighting area, lighting effect, light source concentration, uniform light, glare small, easy to control, maintenance. Electric lift easy to operate, the lamp rose to the working position, the lamp can automatically off, hook, wire rope unloading. Lighting control points are manual, light control, High-pole Lamp time control and microcomputer control.
High pole lights generally refers to 15 meters above the steel cone and high-power combination of light bulbs constitute a new type of lighting device, which consists of the lamp, the internal lighting electrical, rod and the basic part of the combination.
High pole lights are used for roads, roads and other places, its handsome in appearance, should have a strong decorative. Light pole is much higher than the street lamp, lighting area is also greater. High-pole Lamp At the same time the lighting effect is good, light source concentration, light uniform, glare small.
Light plate using electric lift, easy to operate, the lamp rose to the working position, the lamp can automatically off, hook, wire rope unloading. In addition lighting control points are hand control, light control, time control and microcomputer control, easy to control, maintenance.
High pole lights installed
Lamp shape can be based on user requirements, the surrounding environment, the need to specifically determine the lighting, the internal lighting by the high-power LED floodlights and cast light components. The rod body is generally pyramid-shaped individual structure, made of steel plate rolling, height of 15-40 meters, High-pole Lamp mostly two to three sections, irradiation radius of up to 40-80m.
High pole configuration
1. The poles are octagonal, twelve edges, eighteen pyramidal rods, and are made of high strength and high quality steel plate by shearing, bending and automatic welding. The maximum wind resistance is designed to reach 60 m / s. Each specification consists of 3 to 4 plugs, with flange steel chassis, diameter 1 m to 1.2 m, thickness 30 mm to 40 mm.
2. Functional to the framework of the main structure, High-pole Lamp but also to the main decorative materials to steel, steel-based, light pole, light plate with hot dip zinc treatment.
3. Electric lift system consists of electric motor, hoist, three sets of hot-dip galvanized steel wire rope and cable and other components. Light pole installed in the body, lifting speed of 3 to 5 meters per minute.
4. The guide and unloading system consists of a guide wheel and a guide arm to ensure that the lamp plate does not move horizontally during the lifting process to ensure that the lamp panel is automatically disengaged and locked by the hook when the lamp is raised
5. The lighting system consists of high power LED flood light, LED flood light, computer time controller can automatically control the switch light time and part of the lighting or full lighting.
6. Lightning protection system: the lamp roof to install 1.5 meters long lightning rod, High-pole Lamp the basement installed a 1 meter long ground wire and welding with the anchor bolts.