High-pole Lamp Illumination Area Is Large

High-pole lamp: Generally refers to 15--25 meters above the steel column-type lamp rod and high-power modular light frame to constitute a new lighting device. It consists of the lamp holder, the internal lamp electrical, the pole body and the foundation part. Lamp shape can be based on user requirements, High-pole Lamp the surrounding environment, lighting needs specific and fixed; the internal lamp is composed of floodlight and projection light, the light source adopts NG400 high-pressure sodium lamp, and the illumination radius is up to 60 meters. The pole body is generally cylindrical type single structure, with the steel plate roll to form, the height can reach 15-40 meters.

High-pole lamp is used in highways, roads and other places, its handsome in appearance, should have strong decorative. The lamp pole is much taller than the street lamp, High-pole Lamp the illumination area is also bigger. At the same time the lighting effect is good, the light source concentrates, the illumination is even, the glare is small.

Light plate using electric take-off and landing, easy to operate, High-pole Lamp the lamp plate up to work position, the lamp can be automatically removed, hook, wire rope unloading. In addition, lighting control is divided into hand control, light control, time control and microcomputer control, easy to control, maintenance.

High Pole Light Installation

Lamp shape can be based on user requirements, the surrounding environment, lighting needs specific to determine, the internal lamps are more than high-power led floodlight and light light. The pole body generally is the pyramid single structure, uses the steel plate roll to form, the height is 15-40 meters, High-pole Lamp many is two to the composition, the irradiation radius may reach the 40-80m.

The configuration of high pole lamp

1. Lamp rod for eight-sided, 12-sided, 18-sided cone-shaped bar, by the high-strength high-quality steel plate by shearing, bending, automatic welding forming, the design of the maximum wind resistance capacity of up to 6 0 m/s. Each specification is made up of 3 to 4 knots, with flange steel chassis, 1 m to 1.2 m ΓΈ, and mm to 40mm thick.

2. The function of the framework structure, High-pole Lamp but also to decorate the main material to steel, steel pipe, lamp rod, light plate using hot dip zinc treatment.

3. Electric lifting system consists of electric motor, hoist, three groups of hot dip galvanized steel wire rope and cable. The lamp rod body installs, the lifting speed is 3 to 5 meters per minute.

4. Guide, unloading system from the Guide Wheel and the guide arm composition, High-pole Lamp to ensure that the light plate in the process will not occur transverse movement, to ensure that the lamp plate rise in place, the lamp can automatically fall off and locked by the hook.

5. Lighting system by high-power LED projection lights, led floodlight, High-pole Lamp computer time controller can automatically control the switch lamp time and part of the lighting or full lighting.

6. Lightning protection system: the top of the lamp to add 1. 5 meters long lightning rod, underground base installed 1 1 meters long grounding line and welding with the anchor bolts.